Finding the Best Water Softener for Your Home


Share on facebook
Share on Twitter
Share on Google+

Hard water is a problem in many areas. It comes about when there is a concentration of certain metals in the water that create the hardness. The problems caused by hard water are many, so let’s have a look at what constitutes hard water.

The main culprits in hard water are magnesium and calcium. These are found in all water at certain levels. The official line goes that if water contains more than 60mg of magnesium and calcium in a dissolved state, the water is hard. There are locations where this concentration of magnesium and calcium can reach as much as 180mg.

When water hardness is high – at those sort of levels – then it is clear that there is going to be a problem with the concentration of metals. What are the problems with hard water?

Hard Water Problems

Hard water is a problem in the home – and also in industry – in many ways. For example, the metals in the water can react with washing detergents. This results in laundry not being clean when it has been through even the most stringent washing process.

It can also have the same effect in relation to crockery and other items washed in the kitchen sink, leaving it looking dirty and stained.

Hard water also has an effect on the skin, and can result in uncomfortable dryness and scaling. If you wash your hair in hard water, you may find that the effect is not as impressive as you want it to be.

Perhaps the biggest problem with hard water is that it causes a build-up of deposits throughout your plumbing system. This is something that can be costly to repair, and may even lead to replacements being required.

What can you do about hard water? The simple fact is that you can make water softer, so to speak, but you need to have an effective and efficient water softener to do so. If you read this you will see there are a number of different types of water softener for the home, so you can solve the problem with one of these.

Water Softeners

Water softeners are very clever devices that use a variety of processes to reduce the hardness of the water coming into your home. Most concentrate on filtering out the calcium and magnesium in the water, but some models – you can read about them in the review we recommended – also filter iron, another element that can be readily found in home water supplies.

There are a variety of manufacturers offering a range of different models, so you can be sure that you will find one suitable for your requirements. What you do need to consider is the Gallons Per Minute rating, or GPM. This is the amount of water the device can filter in one minute, and will determine whether it will be effective for you, considering the amount of appliances you have using water at any one time.

You also need to bear in mind the various types – for example, salt-based or salt-free – plus whether you need a filter for the whole house water system, or just for single appliances. The range of devices available means you have everything from a very simple system that is aimed at reducing limescale build-up, to more complex set-ups with twin tanks and more power, that will effectively remove as much of the trace metals as is possible.

Whatever your hard water problems, make sure you check out water softeners, as the less-hard your water is, the better it will be for cleaning and washing, and you will eliminate limescale.

 


Share on facebook
Share on Twitter
Share on Google+

Subscribe To Our Newsletter